I tried many different chemicals to soften/dissolve /strip the finish &
never found anything that would work. However, a heat gun did soften the finish
&
allow me to scrape it off without removing the veneer.
Gary Hodson
In a message dated 3/30/2009 6:59:55 P.M. Central Daylight Time,
ahbn6@verizon.net writes:
have
found nothing that will soften the finish so that it can be scraped off and
at
this point I am afraid to start sanding since it would be difficult to tell
when the veneer is exposed.
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100126575x1220439616x1201372437/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DfebemailfooterNO62)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|