Brad -
Originally thes cable ends fit loose in the choke block. I have
noticed the replacements sold by all the vendors are too large,
however, and the don't fit in the choke block now.
If you have a dremel tool, I'd recommend sanding down the surface of
the cable end until it fits the cable block.
Alan
On 5/3/09, Attean Lake Lodge <info@atteanlodge.com> wrote:
> Here I am again, should the barrel ends of the choke cables be forced into
> the
> remote control block holes? If so, how? I am assuming that the block should
> hold the cable ends rigid? I can think of heating the block causing it to
> expand but don't know if that is too extreme. Thanks for previous and future
> help.
> Brad Holden
> 67 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|