Alan,
Dowty Bonded Seal or Earl's Stat-O-Seal are two examples...
See http://www.mpsracing.com/products/Earls/PA_Seals.asp for a
description of both.
Bob
Alan Seigrist wrote:
> All -
>
> I recently rebuilt a set of H4 carbs and the float chamber tops had two
> special washers (used to seal the banjo bolt to the lid) which were aluminum
> on the outside and had little rubber surfaces on the inside to seal the
> banjo bolt. Very nice washers.
>
> Some of the cars I have, I don't drive every day and it drives me nuts that
> the fiber washers in the SU kits will dry out, then leak petrol. Petrol is
> expensive in these parts.
>
> I was wondering if any of you all-knowing people might know if there is a
> source for these special type banjo fitting washers?
>
> Thanks,
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|