I have two 100 cams that I dug out of a storage bin.
Measuring the lobes on the first one I get the following profile (starting
with Exhaust Valve #1 and proceeding back):
Exhaust 1: 1.375
Intake 1: 1.404
Intake 2: 1.384
Exhaust 2: 1.387
Exhaust 3: 1.328
Intake 3: 1.399
Intake 4: 1.391
Exhaust 4: 1.364
Measuring the lobes on the second one I get the following profile:
Exhaust 1: 1.451
Intake 1: 1.440
Intake 2: 1.443
Exhaust 2: 1.451
Exhaust 3: 1.445
Intake 3: 1.426
Intake 4: 1.441
Exhaust 4: 1.429
Can either of these cams be reground? FWIW the second one was an
Iskenderian Cam (I think a T-3) put in by the original owner. The first one
was
the stock cam that he replaced with the Isky.
All opinions appreciated.
Best--Michael Oritt
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|