healeys
[Top] [All Lists]

Re: [Healeys] how to remove heater

To: "I Erbs" <eyera3@gmail.com>, "healey help" <healeys@autox.team.net>
Subject: Re: [Healeys] how to remove heater
From: "Rich C" <richchrysler@quickclic.net>
Date: Wed, 10 Feb 2010 16:48:59 -0500
Ira,

There are captive nuts inside the box section plenum that runs across the 
base of the bulkhead. Heat the heads of those screws up to cherry red and 
they'll come right out.

Don't go anywhere near that car to media blast unless the entire car is 
being stripped off 100%. Sand or whatever the media will get EVERYWHERE, 
into wiring, bearings, mechanicals, rubber bushings, places you wouldn't 
dream it can go.

Why don't you send me pictures of the trunk area you're questioning and I 
can spot holes that shouldn't be there.

Rich
----- Original Message ----- 
From: "I Erbs" <eyera3@gmail.com>
To: "healey help" <healeys@autox.team.net>
Sent: Wednesday, February 10, 2010 3:29 PM
Subject: [Healeys] how to remove heater


> Sorry to be asking so many Healey related questions on this site but here
> goes:
> I am trying to remove my heater on the BT7 so we can sandblast the under
> dash area. What I want to know is:
> are the phillip's head screws on the bottom braces screwed into the 
> bulkhead
> or are there nuts under the asbestos insulation on the engine side of the
> firewall?  We have sprayed the piss out of the screws with rust breaker
> stuff, but they will not release.
>
> Any advise on how to remove the heater unit?  Also I would like a photo of
> the bare trunk (boot) area. I removed the cover material and found a 
> number
> of holes and I can not figure out why they are there. maybe if I see some
> examples  I figure out if they are needed or not.
> Thanks
> -- 
> I Erbs
> Portland, OR
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
Oct08 004.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
oct07 046.jpg]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>