There is a lot of interest on this subject! Great information such as:
Fill the rivet with liquid aluminum and paint
Snap style rivets (two piece I presume)
How rivets work (compression and expansion to fill the hole)
Tool suggestions - sources, costs and types; air hammers, chisels, bucks
Methods - weight on the head while forming the penned end
What did the factory use? Will someone just loan it to me? I can
always dream; right!
At 02:24 AM 4/10/2010 +0000, WILLIAM B LAWRENCE wrote:
>I've been looking for a squeezer... for some riveting I need to
>do... The problem with a squeezer in the case of the shroud to boot
>surround rivets on a Healey is that the ends of the rivets are
>within a sheet metal "C" section that is difficult or impossible for
>any standard shape of squeezer...
>
>Bill Lawrence
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|