From: Quentin Schweninger <quenty@ntelos.net>
Date: April 21, 2010 6:27:17 PM EDT
To: Rich C <richchrysler@quickclic.net>, Healey List <healeys@autox.team.net
>
Subject: Re: [Healeys] Trafficator
Rich
The sizes listed are 3/16, 1/4, and 3/8 long. The thread depth in my
original wheel is 3/16. It appears that would be about the right
length. The the point is about 3/32 long.
I'd measure an original one, or the overall on the too long ones.
Dave
On Apr 21, 2010, at 4:16 PM, Rich C wrote:
I wouldn't mind about the Allan head, it's the length of the set
screws that come with the new wheels that are simply too long. When
turned all the way down they still protrude from the steering wheel
hub about 1/8". My solution allows trimming to proper length and adds
a touch of originality and with the socket portion gone, you cut the
slot and you can set the screw.
Are the Mcmaster-Carr ones short enough?
Rich
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|