Bob,
Many thanks - Will do. I appreciate the simplicity of the solution.
On 5/8/10 5:31 PM, "Heal;ey" <bj7ah@acanac.net> wrote:
> Hi Tom
> I just use Cereal box cardboard with gasket goo on all surfaces, both
> sides of
> gasket and both surfaces and have had no problem with leaks.
>
> Bob 1963 BJ7
>
> --------------------------------------------------
> From: "Thomas Morrione" <tjmorrio@colby.edu>
> Sent: Saturday, May 08, 2010 4:17 PM
> To: <Healeys@autox.team.net>
> Subject: [Healeys] Front shock gasket question
>
>> List folks,
>>
>> I9m about to reinstall front shocks on my 65 BJ8. They were cleaned up and
>> painted, but have been sitting for about two months in a box. I now notice
>> that the gaskets are weeping a little oil -- even after a tightening up
>> that back plate a month ago. They9re both in good shape otherwise I think
>> (good steady resistance). Is it ok to jus take the back plate off and
>> replace the gaskets or will bits pop out at me requiring more internal
>> work?
>>
>> Good source for gaskets? Or, can I make them up of standard gasket
>> material?
>>
>> Thanks,
>> Tom
>> _______________________________________________
>> Healeys@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/bj7ah@acanac.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|