Thanks guys , I'll go the Kilmartin route. My brackets are showing their
40 years.
Mark
----- Original Message -----
From: "Rich C" <richchrysler@quickclic.net>
To: <Editorgary@aol.com>; <healeys@autox.team.net>
Sent: Friday, June 11, 2010 5:05 PM
Subject: Re: [Healeys] Bumperty Brackets
> If new brackets are needed I can highly recommend those made by Kilmartin
> Sheetmetal of Australia. On the last two restorations I have used a full
> set of new Kilmartin bumper mounting brackets and they were the best and
> easiest fitting of any I've experienced over the years. They brought
> everything nice and level, and there was a sufficient margin of fitting to
> allow good gaps between bumper, valance and front apron of the body.
> If you've ever struggled with poor fitting ones, or originals that have
> been beaten straight, you'll know how significant a statement this is!
>
> Rich Chrysler
>
>
> --------------------------------------------------
> From: <Editorgary@aol.com>
> Sent: Friday, June 11, 2010 3:13 PM
> To: <healeys@autox.team.net>
> Subject: Re: [Healeys] Bumperty Brackets
>
>> In a message dated 6/11/10 12:08:16 PM, healeys-request@autox.team.net
>> writes:
>>
>>
>>>
>>> The front bumper brackets on your 6 cylinder Healey
>>>
>>
>> The original bumper brackets also had slots for the bolts that fasten
>> them
>> to the frame rails so that once they're bolted in place they can be slid
>> in
>> and out to get the proper clearance and angle between the bumper and the
>> front of the body. You mentioned drilling new holes -- if you just have
>> round
>> holes, you're going to have a bit of a problem getting the bumper to fit
>> and
>> look proper. Take a look at someone else's BN/BT7 and make sure you've
>> got
>> good replacement parts -- and let me know, since I need to order a set
>> soon
>> to replace my bumper.
>>
>> Cheers
>> Gary
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/lapierrem@sbcglobal.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|