healeys
[Top] [All Lists]

Re: [Healeys] HD8 Slow Run Valve

To: Bob Johnson <bjsbj8@gmail.com>, Healeys <healeys@autox.team.net>
Subject: Re: [Healeys] HD8 Slow Run Valve
From: Alan Seigrist <healey.nut@gmail.com>
Date: Mon, 19 Jul 2010 07:29:56 +0200
Bob -

Sounds to me like your car needs a complete tune up.
Valves then points then timing then mixture/balance and once all of
that is done is when you start fiddling with the slow idle adjustment.

Alan

On 7/19/10, Bob Johnson <bjsbj8@gmail.com> wrote:
> Fiddling with my carbs yesterday using my Haynes manual. thru the step
> to 11 "Restart the engine and adjust the slow running valve to give
> the desired idling speed of approximately 1000 rpm." Apparently
> screwing the valve down slows the idle, up increases speed. Without
> any further adjustment than the 3 1/2 turn the engine will idle
> momentarily at 500-600 rpm then quite. Turning the valves down makes
> it die more quickly. Turning them up/out will not raise the idle speed
> above 600-700, but it will idle for maybe 30 seconds before stalling.
> This is worse as the engine gets warmer. Any ideas as to what is going
> on? Why will it not pick up speed?
>
> Bob Johnson
> BJ8
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>

-- 
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>