Don -
I assume this is for a BJ8.
Make sure the loop is small around the tach pickup.
All you probably need to do is reverse the white wire going in and out
of the pickup loop. And it should work. If the current direction is
reversed, the tach inductance pickup won't work and your tach won't
read anything.
For the charge light - you have to trouble shoot the whole charge
system ... No easy answer here.
Alan
On 8/15/10, Don Day <fsufan1952@yahoo.com> wrote:
> I have a new wiring harness,hooked up just like the old one,my problem is I
> have no tac and my generator lite will not go out.What should I look for?
> Thanks Don,67 BJ-8 almost ready for the road
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|