My short BJ8 hydraulic clutch story:
1. Leaking clutch slave hose - I pulled and replaced, and bled clutch
2. New slave hose pressurized old slave cylinder and caused it to leak - I
pulled and rebuilt, replaced, and bled clutch
3. New slave hose and new slave cylinder caused old master cylinder to leak
- I pulled and rebuilt and replaced, and bled clutch
Also i can't help but to add this separate advice. Buy a new flexible oil
line that connects the engine to the oil pressure guage. Moss part
number 021-711.
$16. A while back I found mine needing replacing after i pulled into my
driveway and saw a line of oil in the street trailing me into my driveway.
Easy replacement, takes about 15-30 min depending on beer or not.
Mark
'67 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|