rebuilt my door hinges recently on the bj8 and now have a problem with one door
not shutting properly. driver side door has to be shut by putting it a certain
distance(approx 9 inches) then pulling it closed gently but not too gently or
it will bounce back to the first detent. sometimes it takes multiple attempts
at various distances and speed. have tried all different positions of the
striker plate, but no luck. pax door works fine. the door latch bushing does
seem to have a little play, but it was no problem before i redid the hinges.
any ideas? hjim
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|