Did you move the door hinge plates out on the A pillar? Have you put
on new door seals?
I'd check there first.
On 9/14/10, healeymanjim@hansencc.net <healeymanjim@hansencc.net> wrote:
> rebuilt my door hinges recently on the bj8 and now have a problem with one
> door not shutting properly. driver side door has to be shut by putting it a
> certain distance(approx 9 inches) then pulling it closed gently but not too
> gently or it will bounce back to the first detent. sometimes it takes
> multiple attempts at various distances and speed. have tried all different
> positions of the striker plate, but no luck. pax door works fine. the door
> latch bushing does seem to have a little play, but it was no problem before
> i redid the hinges. any ideas? hjim
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|