healeys
[Top] [All Lists]

Re: [Healeys] aluminum oil pan

To: "'PG'" <britishcars@shaw.ca>, "'Wayne Schultz'" <waschu2@gmail.com>,
Subject: Re: [Healeys] aluminum oil pan
From: "Dave Porter" <frogeye@porterscustom.com>
Date: Fri, 26 Nov 2010 11:54:16 -0700
On the Moss combo, the pan's inside edge contacts the pump's outside edge..
Nothing to do with the pick up.
dave

frogeye@porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

blog: http://porterbikes.com/


-----Original Message-----
From: PG [mailto:britishcars@shaw.ca] 
Sent: Friday, November 26, 2010 8:55 AM
To: 'Dave Porter'; 'Wayne Schultz'; healeys@autox.team.net
Subject: RE: [Healeys] aluminum oil pan

NOTE:   I fitted an ALI oil pan from Denis Welch a couple of years ago.

The instructions for the pan specifically stated  that the sump pick-up had
to be shortened by about .5" or the pan would not fit.   

To achieve this , I needed to cut the .5" from the tube that connects the
screened pickup to the  pump.

Paul 

-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Dave Porter
Sent: Friday, November 26, 2010 6:29 AM
To: 'Wayne Schultz'; healeys@autox.team.net
Subject: Re: [Healeys] aluminum oil pan

Yes... The Moss supplied Al sump pan and the Moss supplied oil pump won't
fit. I've waited about a year for an answer from their tech dept.
Dave

frogeye@porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

blog: http://porterbikes.com/


-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Wayne Schultz
Sent: Friday, November 26, 2010 7:17 AM
To: healeys@autox.team.net
Subject: [Healeys] aluminum oil pan

Hi

     I am having trouble fitting an after market aluminum oil pan to a 
3000 engine.  The inside of the oil pan is hitting the corner of the oil 
pump preventing the bolts from lining up with the block. Has anyone seen 
this before?  If I removed about 1/8 " or so from the corner of the pump 
I could probably get the pan to fit.


                                                                         
                Thanks
 
Wayne
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/britishcars@shaw.ca
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>