No, BJ8's have bolts. Comes in handy when converting to solid wheels from
wires. Over the past 30 years, I have had mine off and on a few times. I can't
recall ever finding a loose one. I think it is a non-probem.
Ken Freese
65 BJ8
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of warthodson@aol.com
Sent: Sunday, March 13, 2011 2:20 PM
To: bspidell@comcast.net; healeys@autox.team.net
Subject: Re: [Healeys] Rotor Bolts
I thought those "bolts" are actually studs that are pressed into the hub. The
unthreaded portion of the stud has splines which should prevent them from
turning when you tighten the nuts.
Gary Hodson
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|