Connect positive terminal on the 'donor' car/battery to positive battery
terminal or chassis--preferably chassis--on Healey.
Connect negative battery terminal--or chassis, preferably--on donor to negative
terminal on Healey battery.
Make the last connection--on either--to the nominal ground (i.e. positive lead
to chassis on Healey or negative lead to
chassis on donor).
Turn key on and hit the starter.
Bob
On 5/13/2011 8:11 PM, Elton Schulz wrote:
> What is the correct hookup procedure for jump starting a positively ground
>car?
> Thanks,
> Elton
> ----- Original Message ----- From: "Leonard Berkowitz"
><drberkowitz@hotmail.com>
> To: <healeys@autox.team.net>
> Sent: Friday, May 13, 2011 10:21 AM
> Subject: Re: [Healeys] Can't get the Healey started~
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|