Jose -
Correct! The fibre washer with the funny slots is on the bottom, and the
aluminum one goes on top. You need the fibre slotted one at the bottom so
that your float bowl doesn't become pressurized when you turn the fuel pump
on! You will get fuel spraying out of your carb like a fuel injector!
Cheers,
Alan
On Tue, May 31, 2011 at 1:20 PM, Jose Vicente Vargas <jvvmusme@yahoo.com>wrote:
> What is the correct order of the washers in the float bowl...?
>
> I have float boal lid, red fiber washer, overflow pipe, bracket, aluminium
> washer, nut.
>
> Is this correct ?
>
>
> Sent from my iPad
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|