healeys
[Top] [All Lists]

[Healeys] Float bowl washers correct order

Subject: [Healeys] Float bowl washers correct order
From: jvvmusme at yahoo.com (Jose Vicente Vargas)
Date: Tue, 31 May 2011 06:08:48 -0500
References: <CA3A4594-51DA-4575-A2BA-167107EB520C@yahoo.com> <BANLkTin-6rvG9PROhRX_bXnSUtbLyth6Kw@mail.gmail.com>
Yes ! But my concern is after the overflow pipe....

Is the order overflow pipe, bracket, aliminuim washer, nut

Or is it

Overflow pipe, aluminium washer, bracket, nut



Sent from my iPad


On May 31, 2011, at 1:17 AM, Alan Seigrist <healey.nut at gmail.com> wrote:

> Jose -
>
> Correct!  The fibre washer with the funny slots is on the bottom, and the
aluminum one goes on top.  You need the fibre slotted one at the bottom so
that your float bowl doesn't become pressurized when you turn the fuel pump
on!  You will get fuel spraying out of your carb like a fuel injector!
>
> Cheers,
>
> Alan
>
> On Tue, May 31, 2011 at 1:20 PM, Jose Vicente Vargas <jvvmusme at yahoo.com>
wrote:
> What is the correct order of the washers in the float bowl...?
>
> I have float boal lid, red fiber washer, overflow pipe, bracket, aluminium
> washer, nut.
>
> Is this correct ?
>
>
> Sent from my iPad
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com

<Prev in Thread] Current Thread [Next in Thread>