healeys
[Top] [All Lists]

[Healeys] Power

Subject: [Healeys] Power
From: eyera3 at gmail.com (I Erbs)
Date: Wed, 15 Jun 2011 16:41:32 -0700
References: <1530185042.1655129.1308157233313.JavaMail.root@sz0054a.emeryville.ca.mail.comcast.net> <0789E1CF-C555-431D-892B-91264ABA3758@gmail.com>
I know it was said before, but check for dirty fuel filter of carb screens
if fited

On Wed, Jun 15, 2011 at 4:16 PM, Chris Dimmock <austin.healey at 
gmail.com>wrote:

> Hi Bob,
> Check your fuel delivery volume. I.e. How much fuel your pump delivers per
> minute. I had the same issue with a Sprite once. Turned out to be a weak
> fuel pump.....
> http://www.myaustinhealey.com/austin_healey_technical_articles.html
> Best.
> Chris
>
> Sent from my iPhone
>
> On 16/06/2011, at 3:00 AM, Bob Spidell <bspidell at comcast.net> wrote:
>
>  I noticed on my most recent long road trip that my BJ8 seemed to be
>> running out of HP and/or torque on long uphill grades. I seem to get to
>> about 4K RPM then the engine won't rev any more (yes, I downshift as
>> required--it just seems the engine should be able to rev a bit more to go
>> with the low-end torque). The engine is mostly stock--except for aftermarket
>> air and oil filters and Pertronix ignition--and has about 80K miles on a
>> rebuild. Cylinders were bored 0.030" over from an earlier rebuild. The cam
>> is the mildest of 5 grinds offered by Crower; slightly lopey at idle but
>> generally smooth and responsive (about 252deg overlap at 0.050"). I have a
>> Lempert 3.54 rearend installed, which of course has a significant impact.
>> The exhaust is made of Ansa pipes with newer glasspacks stitched in--I
>> believe it flows reasonably well.
>>
>>
>> Bob
>>
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3 at gmail.com
>



-- 
Ira Erbs
IT CONSULTANT
Portland, OR

 We can't solve problems by using the same kind of
thinking we used when we created them.
                                           -Albert Einstein

<Prev in Thread] Current Thread [Next in Thread>