I have a new spring. I bought a handle off ebay and it has the short lever,
I need the longer one. Was thinking of just welding on an extension, and
avoid the whole hassle....
On Wed, Jun 29, 2011 at 9:27 AM, W.D. Nelson <nelson_wd at msn.com> wrote:
> I used a drift and had no issue removing the pins holding the levers that
> actuate the door stop. I had to replace the short levers that are used, I
> believe, on the BT7 with the longer lever used on my older 3000 BN 7. I do
> fear that I weakened the spring in this excercise but intend to correct that
> with new springs prior to final installation.
> > Date: Wed, 29 Jun 2011 11:07:36 -0400
> > To: eyera3 at gmail.com; healeys at autox.team.net
> > From: barrie at look.ca
> > Subject: Re: [Healeys] BT7 door handles
>
> >
> > Please tell me too - I have handles off my current project and zi
> > want to re-chrome them.
> >
> >
> >
> > At 11:42 PM 6/28/2011, I Erbs wrote:
> > >I read
> > >
> > >Richard Bittmann great description in the archives on whatg to look
> > >out for when rebuilding door handles, but I found no info on how to
> > >take them apart without
> > >breaking them. I have a number of them, and need to mix and match the
> > >best parts to build two outside handles.
> > >
> > >So how do I get the pins out without hosing the parts?
> > >
> > >
> > >--
> > >Ira Erbs
> > >IT CONSULTANT
> > >Portland, OR
> > >
> > > We can't solve problems by using the same kind of
> > >thinking we used when we created them.
> > > -Albert Einstein
> > >_______________________________________________
> > >Healeys at autox.team.net
> > >Donate: http://www.team.net/donate.html
> > >Suggested annual donation $12.75
> > >Archive: http://www.team.net/archive
> > >Forums: http://www.team.net/forums
> > >Unsubscribe/Manage:
> > >http://autox.team.net/mailman/options/healeys/barrie at look.ca
> >
> > Regards
> >
> > Barrie
> > barrie at look.ca
> > (705) 721-9060
> > _______________________________________________
> > Healeys at autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/nelson_wd at msn.com
>
--
Ira Erbs
IT CONSULTANT
Portland, OR
We can't solve problems by using the same kind of
thinking we used when we created them.
-Albert Einstein
|