Thanks to all
I decided to use the original pistons instead of the oring ones because i felt
that the original ones had better clearance and the o ring one were too loose
inside the cilinder
I got the rings locally
Jose
Sent from my iPad
On Aug 12, 2011, at 2:05 AM, "Thomas Willig" <twillig@ruda.de> wrote:
> Jose,
>
> although they are in the UK and not in the US, look
http://www.overdrive-repairs.co.uk/
> They sell the required rings for 35,00 pounds.
>
> Thomas Willig
>
>
>
> -----UrsprC<ngliche Nachricht-----
> Von: Herbert Miller [mailto:hgmiller3@qwest.net]
> Gesendet: Donnerstag, 11. August 2011 19:49
> An: 'Jose Vicente Vargas'; healeys@autox.team.net
> Betreff: Re: [Healeys] BN2 overdrive piston rings
>
> Jose
> When I rebuilt a couple of overdrives a while back I installed updated
> actuator pistons that use an O ring seal instead of the metal rings. The
> cost of the new pistons and O rings was about the same as the new rings
> alone.
> Herb Miller
> 1962 BT7
> 1967 BJ8
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net]
> On Behalf Of Jose Vicente Vargas
> Sent: Tuesday, August 09, 2011 8:22 PM
> To: healeys@autox.team.net
> Subject: [Healeys] BN2 overdrive piston rings
>
> Does anyone sales the overdrive pistons ring in the US?
>
> It is for the original pistons....
>
> Thanks
>
> Jose
>
>
> Sent from my iPad
>
>
> Sent from my iPad
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/hgmiller3@qwest.net
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1392 / Virus Database: 1520/3824 - Release Date: 08/09/11
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|