Maybe? Can you tell me how to determine, or should check a parts catalog.
The only thing I have right now is a Victoria Ltd.
Alan
----- Original Message -----
From: "Chris Dimmock" <austin.healey at gmail.com>
To: "Alan Grossman" <agrossman at pacific.net>
Cc: <healeys at autox.team.net>
Sent: Thursday, August 11, 2011 5:55 PM
Subject: Re: [Healeys] Pedal travel ?
> Alan, did the PO mix up the brake and clutch master cyls?
> What model Healey?
> From memory The brake mcyl has a valve in it to retain pressure. Clutch
> doesn't.
> Or potentially wrong dia master cyl - power boosted BJ8's are a different
> mcyl to non boosted I think?
> Chris
> Sent from my iPhone
>
> On 12/08/2011, at 9:48 AM, "Alan Grossman" <agrossman at pacific.net> wrote:
>
>> This is 2 questions.
>> My brake pedal stops about an inch above the floor. I have adjusted the
>> brakes, replaced the front cyls. Checked the rears they are not weeping.
>> Everything seemed to bleed well.
>>
>> The po states that he always had the problem of excessive travel( the
>> adjusters were broken when I got the car). He rebuilt the master 3
>> times. I
>> intend to replace it. Anything I am missing?
>>
>> Also the clutch pedal at rest is about an inch or more closer to the
>> driver
>> than the brake. This exacerbates the feeling of too much brake travel
>> but is
>> obviously not the problem. Should there be a stop that holds the clutch
>> pedal
>> in plane with the brake?
>>
>> Thanks, Alan
>> _______________________________________________
>> Healeys at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com
|