Greg,
Yes, that is correct for the factory to have installed a very small screw at
the top of the door seal's climb up the shut pillar edge, right where the
furflex has to make a very abrupt and tight turn and leap over to the top
edge of the rear quarter trim panel.
Rich
-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at
autox.team.net]
On Behalf Of Greg Mandas
Sent: 2011-09-21 10:34
To: Jack Feldman
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Furflex Problem
On my, PO reportedly original, BJ8 there's a screw at the top.
Greg
65BJ8
Sent from my iPhone so please excuse typos and brevity.
On Sep 21, 2011, at 10:39 AM, Jack Feldman <qualitas.jack at gmail.com> wrote:
> The fuzzy trim around the door of my BT7 won't stay in place. At first the
> mechanic just pinched the metal part. That didn't stay on. Next he tried
> some sort of (trim?) cement which is yellow, and not at all flexible as
trim
> cement should be. I suspect he used something that dried out and then
didn't
> hold.
>
> How do I get the trim to stay in place? I do have a nice fresh tube of 3M
> trim cement.
>
> Does anyone have a guess as to what the yellow stuff is and how do I get
the
> yellow stuff, which dried solid, off the car?
>
> Thanks,
>
> Jack
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/gmandas at yahoo.com
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/richchrysler at quickclic.net
|