Tom -
If you still have you OEM drilled holes, basically the seat already
goes about as far back as it will go, less maybe half and inch. You
can get a bit more leg room and comfort by drilling the seat cushion
and putting a wedge spacer between the seat frame and slide.
Alan
On 3/12/12, Thomas J. Morrione <tjmorrio at colby.edu> wrote:
> Hi folks. Quick question for those who have moved their BJ8 driver seat back
> for added leg room. How far back can one move the seat slides before the
> seat back hits the rear seat shelf? A max ball park inches would do it for
> me. I don't have the seats now to actually put them in the car and test and
> want to put in the muffler system and heat shield along with the tracks.
>
> Thanks a lot in advance for the help.
>
> Tom
> 65 BJ8 in process
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>
>
--
Sent from my mobile device
|