Thanks Alan.
Copper or steel according to John Spauer?
Does it matter?
/Peter
-----Ursprungligt meddelande-----
Fren: healey.nut at gmail.com [mailto:healey.nut at gmail.com]
Skickat: den 9 maj 2012 00:27
Till: Peter Ehn; healeys-bounces at autox.team.net; Bob Spidell
Kopia: healeys at autox.team.net
Dmne: Re: [Healeys] Speedo/Cable/Angle Drive - BJ8
The main thing about this washer is it needs to be made out of copper. It's a
standard thickness (not thin). Take your speedo drive to the hardware store
and select the washer that best fits. However, ordering the correct washer
would be advisable... This washer acts as a sort of thrust bearing. Try ahead
4 healeys, they'll have it.
Alan
Sent by BlackBerry. from PCCW mobile
-----Original Message-----
From: "Peter Ehn" <peter.ehn at frontwalker.se>
To: Bob Spidell<bspidell at comcast.net>
Cc: <healeys at autox.team.net>
Subject: Re: [Healeys] Speedo/Cable/Angle Drive - BJ8
Thanks Bob for your answer. I've read this, but don't have time to order from
Moss, living on the other side of the "pond". :-)
Peter Ehn.
+46 708 33 72 97
peter.ehn at frontwalker.se
(skickat frC%n min iPhone)
8 maj 2012 kl. 19:27 skrev "Bob Spidell" <bspidell at comcast.net>:
> Can't help on dimensions, but here's some info:
>
> http://www.mossmotors.com/graphics/products/PDF/021-511.pdf
>
> Bob
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
>
>
> Hi all,
>
> I found the old discussion thread below while surfing for info on the
> angle drive for a BJ8.
>
> I have a new one on order since mine failed last week.
>
>
>
> Does anyone know the dimension of the washer mentioned, thickness of
> course most important?
>
> I want to know if I don't receive one with my order.
>
>
>
> Thanks, Peter Ehn
>
>
>
> PS.
>
> My drive "crashed" last week, and I think I actually reset the trip
> meter while driving as someone mentioned in the old thread. Don't know
> if this was the cause, but speedo and cable are OK and easy to spin by
> hand.
>
>
>
>
>
> Peter Ehn
> AH 3000 MKIII, 1967. BJ8 42208.
> Bromma/Stockholm, Sweden
> Phone: +46 708 33 72 97
> E-mail: peter.ehn at frontwalker.se <mailto:peter.ehn at frontwalker.se>
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
|