healeys
[Top] [All Lists]

Re: [Healeys] Fuel Pump Points

To: Alan Seigrist <healey.nut@gmail.com> s=q20121106; t=1356316728; bh=0ONjl1asb5nL0U52DpTBrJlffs/yoa3kiegpZ+SzQPA=; h=Received:Received:Date:From:To:Message-ID:Subject:MIME-Version: Content-Type; b=q9ikGUQPRs2llfLqeJeuSetHYp6Ts+MkfFavbfEXr15oVUGdYniX0F0qs0f7FUrmX brqk6n4c+xT1oSHhZ4xoZGe3P8ut4fnrY+1+00SV4suRnRbp/4aKMF+7vp013AlcL7 k7U4vrxCvp80G09K7fbC5Zva5NwWFc8AwXXGp36JBg656HUO7yaW48hG9GvPiAp4BK t+l8qvnuvVoTzHRp/YyxpmXhNDemp/PmVul03cbUStyyZG/3sUqImS0wmd++mO9jva XtjnV8kjUFq8l0tM/EbX0soEWg4jS7w5MR2KXycrEhkucp/+dUJWJioB76qklllS3y p7eeuzwKz+3fA==
Subject: Re: [Healeys] Fuel Pump Points
From: Bob Spidell <bspidell@comcast.net>
Date: Mon, 24 Dec 2012 02:38:48 +0000 (UTC)
Cc: Healey List Healey List <healeys@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
And if you use a transil, it don't matter. 

Bob 


-------------------------------- 
Bob Spidell - San Jose, CA 

----- Original Message -----


Price - 

If you use a condensor, then the pump is not polarity sensitive and can be 
positive or negative ground. If you use a diode, then you will have to 
switch terminals if you switch polarity. 

Best, 

Alan 

On Sun, Dec 23, 2012 at 11:47 PM, David Nock British Car Specialists < 
healeydoc@sbcglobal.net> wrote: 

> Yes you can remove the electrical part of the pump to replace the points. 
> Remember to add a diode rather than the condenser. 
> We have both in stock. 
> 
> 
> David Nock 
> British Car Specialists 
> Stockton Ca 95205 
> 209-948-8767 
> 
> www.britishcarspecialists.com 
> 
> Please feel free to view an interview with the Nock's in 2009 
> Enjoy 
> www.youtube.com/watch?v=QOTTRYkbQzs 
> . 
> . 
> 
> Sent from my iPad 
> 
> On Dec 22, 2012, at 11:07 AM, "R. Price Lindsay" <050.rpl@gmail.com> 
> wrote: 
> 
> > I have an original type fuel pump on my BJ8 that I want to change the 
> points 
> > on and add a transil to it (I may want to convert to negative ground in 
> the 
> > near future and the pump functions fine now). Do I have to remove the 
> entire 
> > unit from the vehicle or can I just pull the electrical parts off and 
> leave 
> > the body in place? 
> > 
> > Price Lindsay 
> > 67 BJ8 
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>