healeys
[Top] [All Lists]

Re: [Healeys] BN1 and BN2 front fenders - check me on this please.

To: healeys@autox.team.net
Subject: Re: [Healeys] BN1 and BN2 front fenders - check me on this please.
From: fiat500f@aol.com
Date: Mon, 4 Mar 2013 00:32:52 -0500 (EST)
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <4939a.470e2315.3e60de60@aol.com> <CAJKrNeTeSJMi7A6=PkScTuro=qZ4Je8WUo4CsRuNg+dDVQmk2g@mail.gmail.com> <8CFE5F432F6EBD1-FB0-BF33D@webmail-d085.sysops.aol.com> <CAJKrNeQ3Cm-501OJBR3_mn+_N5PbqVefN6MjBH_AmLCdSwxkgg@mail.gmail.com>
So, since there are THREE types of BN1 front fenders, but only TWO sets of
part numbers, does that mean that the parts numbers are wrong?  The Healey
Service Journal is describing BN1 and BN2 and 9 1/2" and 9" respectively.  But
since the BN2's are 7 1/2", either the measurements on the Journal entry are
wrong, or the part numbers are wrong.  The Journal entry is stating:

BN1: 9 1/2"
R/H front  - 4B1032
L/H front - 4B1033

BN2: 9"
R/H front - 4B2027
L/H front - 4B2028

Snice there is no 7 1/2" fender listed, either the measurements would be
wrong, or, there is no correct part number for the 7 1/2" BN2 fenders? Yeah?

 - Paul B.


-----Original Message-----
From: Curtis Arndt <cnaarndt@gmail.com>
To: fiat500f <fiat500f@aol.com>; Roland Wilhelmy <rwil@sbcglobal.net>;
ATIGHTPROD <ATIGHTPROD@aol.com>
Cc: healeys <healeys@autox.team.net>
Sent: Sun, Mar 3, 2013 2:21 pm
Subject: Re: [Healeys] BN1 and BN2 front fenders - check me on this please.


Paul,

Correct, this is what our research and the Concours Guidelines state.

Curt


On Sat, Mar 2, 2013 at 11:02 PM,  <fiat500f@aol.com> wrote:

Right, seems there are three front fenders for 100-4 then.  Early BN1 - 9
1/2", later BN1 - 9", and BN2 - 7 1/2".  There doesn't seem to be anything in
the parts book about the two BN1 fenders, just BN1 and BN2.

 - Paul B.



-----Original Message-----
From: Curtis Arndt <cnaarndt@gmail.com>
To: ATIGHTPROD <ATIGHTPROD@aol.com>
Cc: rwil <rwil@sbcglobal.net>; fiat500f <fiat500f@aol.com>; healeys
<healeys@autox.team.net>
Sent: Sat, Mar 2, 2013 9:31 pm
Subject: Re: [Healeys] BN1 and BN2 front fenders - check me on this please.


Mike,

And some early BN2s had a BN1 front fender on one side and a BN2 fender on
the
other.  I've found one original car with this anomaly.

Cheers,

Curt



On Thu, Feb 28, 2013 at 8:22 AM,  <ATIGHTPROD@aol.com> wrote:

In a message dated 2/27/2013 10:11:15 P.M. Pacific Standard Time,
rwil@sbcglobal.net writes:

Don't forget, some BN2s had  BN1 fenders.


Mike MacLean
56 BN2
60 AN5



http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>