I have an early BN1 and it has the closed gap fenders. To be honest,
stylistically, I like it better than the cutouts on my BJ8. Downside is
your suspension needs to be tight otherwise you can bash up the fender tops
all the time.
On Mon, Mar 4, 2013 at 1:32 PM, <fiat500f@aol.com> wrote:
> So, since there are THREE types of BN1 front fenders, but only TWO sets of
> part numbers, does that mean that the parts numbers are wrong? The Healey
> Service Journal is describing BN1 and BN2 and 9 1/2" and 9" respectively.
> But
> since the BN2's are 7 1/2", either the measurements on the Journal entry
> are
> wrong, or the part numbers are wrong. The Journal entry is stating:
>
> BN1: 9 1/2"
> R/H front - 4B1032
> L/H front - 4B1033
>
> BN2: 9"
> R/H front - 4B2027
> L/H front - 4B2028
>
> Snice there is no 7 1/2" fender listed, either the measurements would be
> wrong, or, there is no correct part number for the 7 1/2" BN2 fenders?
> Yeah?
>
> - Paul B.
>
>
> -----Original Message-----
> From: Curtis Arndt <cnaarndt@gmail.com>
> To: fiat500f <fiat500f@aol.com>; Roland Wilhelmy <rwil@sbcglobal.net>;
> ATIGHTPROD <ATIGHTPROD@aol.com>
> Cc: healeys <healeys@autox.team.net>
> Sent: Sun, Mar 3, 2013 2:21 pm
> Subject: Re: [Healeys] BN1 and BN2 front fenders - check me on this please.
>
>
> Paul,
>
> Correct, this is what our research and the Concours Guidelines state.
>
> Curt
>
>
> On Sat, Mar 2, 2013 at 11:02 PM, <fiat500f@aol.com> wrote:
>
> Right, seems there are three front fenders for 100-4 then. Early BN1 - 9
> 1/2", later BN1 - 9", and BN2 - 7 1/2". There doesn't seem to be anything
> in
> the parts book about the two BN1 fenders, just BN1 and BN2.
>
> - Paul B.
>
>
>
> -----Original Message-----
> From: Curtis Arndt <cnaarndt@gmail.com>
> To: ATIGHTPROD <ATIGHTPROD@aol.com>
> Cc: rwil <rwil@sbcglobal.net>; fiat500f <fiat500f@aol.com>; healeys
> <healeys@autox.team.net>
> Sent: Sat, Mar 2, 2013 9:31 pm
> Subject: Re: [Healeys] BN1 and BN2 front fenders - check me on this please.
>
>
> Mike,
>
> And some early BN2s had a BN1 front fender on one side and a BN2 fender on
> the
> other. I've found one original car with this anomaly.
>
> Cheers,
>
> Curt
>
>
>
> On Thu, Feb 28, 2013 at 8:22 AM, <ATIGHTPROD@aol.com> wrote:
>
> In a message dated 2/27/2013 10:11:15 P.M. Pacific Standard Time,
> rwil@sbcglobal.net writes:
>
> Don't forget, some BN2s had BN1 fenders.
>
>
> Mike MacLean
> 56 BN2
> 60 AN5
>
>
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|