healeys
[Top] [All Lists]

Re: [Healeys] Front Wheel Grease Retaining Cups (Reproductions).

To: magnuskarlsson@bornet.net, glwilkie1@bigpond.com
Subject: Re: [Healeys] Front Wheel Grease Retaining Cups (Reproductions).
From: warthodson@aol.com
Date: Sun, 15 Sep 2013 10:32:19 -0400 (EDT)
Cc: healeys@autox.team.net
Delivered-to: mharc@autox.team.net
Delivered-to: healeys@autox.team.net
References: <BLU177-W748FB5C0B0630FBC2D503E3250@phx.gbl> <1B12702C-6246-433B-B40D-E439886ED058@bornet.net>
If you do not have a lathe you can probably chuck the threaded stud into an
electric drill and file or sand down the O.D.
Gary Hodson


-----Original Message-----
From: Magnus Karlsson <magnuskarlsson@bornet.net>
To: Graham Wilkie <glwilkie1@bigpond.com>
Cc: healeys <healeys@autox.team.net>
Sent: Sun, Sep 15, 2013 4:49 am
Subject: Re: [Healeys] Front Wheel Grease Retaining Cups  (Reproductions).


You have just encountered a poor reproduction. They have been sold like this
for years. If you can't find original ones that are made to the correct
sizes,
you better try to mount the in a laithe and file down the surfaces that will
be in contact with the hub.

The fit should be a light press fit. You should almost be able to pull them
out by hand.

Magnus Karlsson

www.concourshealeys.com
_______________________________________________
Archive: http://www.team.net/archive

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Healeys] Front Wheel Grease Retaining Cups (Reproductions)., warthodson <=