Got it out after some heavy hitting!
Before I even attempt to remove the drive dog (have new petronix that needs
the old dog) anyone have any advice?
Thanks,
Simon
Cell 860-324-0248
> On Nov 4, 2013, at 12:38 PM, Wilko2 <e-wilkins@cox.net> wrote:
>
> I just went and played with one I have on the bench. There's nothing
special
> that would get in the way at about an inch out. Make sure the clamping
plate
> is very loose and rotate as you pull. If you can, rotate the shaft counter
> clockwise as you pull to free the tach drive gear.
>
> Rick
>
>> On Nov 4, 2013, at 7:50 AM, Simon Atkinson wrote:
>>
>> Not sure if this email went out yesterday....
>>
>> Having a hard time separating the distributor from the tach drive housing.
>> Both are off the car.
>>
>> If I pull the distributor away from the housing it will only move about an
>> inch. What am I not doing right?
>>
>> Thanks,
>> Simon
>> Cell 860-324-0248
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/e-wilkins@cox.net
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/satkinson1974@gmail.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|