The front suspension is in good shape. I will have the frame and suspension
blasted with baking soda and the frame will be primed and painted OEW. The
overspray can be handled and limited so it won't coat the suspension too much.
Then I could hand paint all the suspension pieces gloss black. I could then
leave the lower a arms attached. Any thoughts?
Sent from my iPhone
Chris Scholz OD
> On Oct 19, 2014, at 6:28 PM, "Patrick & Caroline Quinn"
<p_cquinn@tpg.com.au> wrote:
>
> G'day
>
> About 12 months back I was having the same sort of fun so I made up a
> similar tool and despite being time consuming I did manage to get them out.
>
> Hoo Roo
>
> Patrick Quinn
> Blue Mountains, Australia
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of John
Sims
> Sent: Monday, 20 October 2014 5:04 AM
> Cc: 'healeys'
> Subject: Re: [Healeys] Remove bolts lower A arm
>
> Look here:
>
> http://www.pbase.com/stevegerow/image/142125264
>
>
> John Sims, BN6
> Aberdeen, NJ
>
> www.healey6.com
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of John
> Spaur
> Sent: Sunday, October 19, 2014 11:58 AM
> To: 'Bob Spidell'; 'Chris Scholz'
> Cc: 'healeys'
> Subject: Re: [Healeys] Remove bolts lower A arm
>
> Make a fulcrum pin extractor like the one Bob is referring too and as shown
> in this sketch that was provided by another lister a while back. Sorry, but
> I forgot the person's name.
>
> John
> '62 BT7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/drscholz@visioncenterpc.com
_______________________________________________
Archive: http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|