healeys
[Top] [All Lists]

[Healeys] Thermostat runs with blanking sleeve

Subject: [Healeys] Thermostat runs with blanking sleeve
From: steveg at abrazosdata.com (Steve B. Gerow)
Date: Tue, 05 Sep 2017 07:09:17 -0800
You can run the Moss blanking sleeve with a thermostat. 

I had cut away the blanking sleeve except for the part necessary to cover the 
bypass port. I ran it with a 180 degree fail-open thermostat and 2 Moss rubber 
gaskets, one of which had the hole slightly enlarged to accommodate the 
increased thickness of the thermo plus blanking sleeve. 

Separately I had bought the BCS 160 degree robertshaw with soldered ring 
blanking sleeve. I modified this by replacing the t-stat with a 180 degree 
robertshaw with their ring soldered on. I'm now using that because the 
robertshaw has a much larger opening than the Moss fail-open.


>><
Date: Mon, 4 Sep 2017 14:19:19 +0000 (UTC)
From: Michael MacLean <rrengineer.mike at att.net>
To: "rchaskell at earthlink.net" <rchaskell at earthlink.net>,  Per
Schoerner <per at schoerner.se>, Healey list <healeys at autox.team.net>
Subject: Re: [Healeys] Bellows Thermostats

The blanking sleeve has a small lip that sits in the same recess as the 
thermostat. ?Not sure both the blanking sleeve lip and a thermostat together 
will fit and seal the cover correctly.Mike MacLean

Sent from Yahoo Mail on Android

  On Mon, Sep 4, 2017 at 7:07 AM, Bob Haskell<rchaskell at earthlink.net> 
wrote:   Moss sells a thermostat bypass blanking sleeve.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=69821

I wonder if you could combine this with a "standard" thermostat to
approach the original with the sleeve?

Cheers,

Bob Haskell
AHCA 3000 MkI registrar
http://www.ciahc.org/registry_3000mk1.php

<<>

-- 
Steve Gerow
Altadena, CA
BN6 / 4whl discs
Maker of Most Complete Big Healey Rear Disc Kit

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Thermostat runs with blanking sleeve, Steve B. Gerow <=