Ken,
I once had pix before the H drive crash but all I can do now is tell you about
them. Don't know how married you are to concourse but I put about 10" lengths
of the boot seal for MGB at each corner of opening. No rattle and looks fine.
Keith
-----Original Message-----
From: goldengt <goldengt at cal.net>
To: healeys <healeys at autox.team.net>
Sent: Mon, Sep 4, 2017 8:39 pm
Subject: [Healeys] 6 cyl bonnet hige rattle
The painter centered the bonnet in the hole so now the hinges rattle. Stuffing
cardboard on each side of the hinge stops the rattle. Any better appearing
suggestions? Root cause is bent bonnet remains bent for the time being so that
the rubber buffers are not touching the bonnet.
Ken Freese
65 BJ8
Sent from my Verizon, Samsung Galaxy smartphone
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170905/0a7ad6c5/attachment.html>
|