healeys
[Top] [All Lists]

[Healeys] Rear Axle Slave Cyl

Subject: [Healeys] Rear Axle Slave Cyl
From: rrengineer.mike at att.net (Michael MacLean)
Date: Sun, 17 Sep 2017 00:40:02 +0000 (UTC)
References: <2126721182.820502.1505585125548.ref@mail.yahoo.com> <2126721182.820502.1505585125548@mail.yahoo.com> <08962156-0efb-cc6d-1ebe-24e78b56fc74@comcast.net>
Thanks guys.? I finally got them out.? After thinking about it for a while I 
took two small screwdrivers that the blades would just fit in the slots where 
the bottom plate tabs "locked" the top plate in place.? I drove them in the 
slot over the "hooks" and tapped the top plate off using a screwdriver and a 
small hammer.? Everything came apart quite easily after that.? Pain in the 
butt.? Now I can paint the backplate and re-assemble everything.? Painted the 
axle casing today after getting it back from the machine shop where it was hot 
tanked.? Had new bearings and seals installed in the hubs.? The pumpkin has 
been checked out and is serviceable.? I have pre-bent brake lines I bought in 
2006 from Doug Finespanner to put on the rear end and the rest of the car.? 
Just waiting for the paint to dry now.? Hope I put it all together correctly. 
;^)Mike MacLean

Sent from Yahoo Mail on Android 
 
  On Sat, Sep 16, 2017 at 4:33 PM, Bob Spidell<bspidell at comcast.net> wrote:  
 _______________________________________________
Archive: http://www.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170917/882dbb8e/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Untitled
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170917/882dbb8e/attachment.ksh>

<Prev in Thread] Current Thread [Next in Thread>