[Healeys] Torque settings needed

Subject:	[Healeys] Torque settings needed
From:	michael.oritt at gmail.com (Michael Oritt)
Date:	Sat, 14 Oct 2017 09:15:00 -0400

I am about to replace the connecting rod and center main bearings on my 100
and do not understand the following statement in the Service Manual:

"Main Bearing Stud Nuts/Connecting rod big end
nuts.....................Castellated-tighten to Nr. Slot."

The rod and main cap nuts are not castellated and even if they were
shouldn't there be a torque value given?

Best--Michael Oritt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20171014/f7325d49/attachment.html>

<Prev in Thread]	Current Thread	[Next in Thread>
[Healeys] Torque settings needed, Michael Oritt <= [Healeys] Torque settings needed, Michael Salter [Healeys] Torque settings needed, josef-eckert at t-online.de [Healeys] Torque settings needed, Michael Oritt [Healeys] Torque settings needed, jim [Healeys] Torque settings needed, Michael Oritt [Healeys] Torque settings needed, ATIGHTPROD at aol.com

Previous by Date:	[Healeys] Phase 1 BJ8 Tire Size Question, warthodson at aol.com
Next by Date:	[Healeys] Torque settings, continued, Michael Oritt
Previous by Thread:	[Healeys] Paint & info, gablegerry at netscape.net
Next by Thread:	[Healeys] Torque settings needed, Michael Salter
Indexes:	[Date] [Thread] [Top] [All Lists]