healeys
[Top] [All Lists]

[Healeys] Generators

Subject: [Healeys] Generators
From: cnaarndt at gmail.com (Curtis Arndt)
Date: Tue, 10 Oct 2017 17:31:01 -0700
References: <14c12fc1-e339-aa0d-b4e3-460a009c4c4d@chello.nl> <20171010152723.TKF5R.6532.root@pamxwww07-z01> <CAJKrNeQ_iaWxCn-6=mYsPzeEyW1KJ5RT_n9OymSbEdOQXLoAxA@mail.gmail.com>
Ray

The number cast into the bracket ear on the back of bracket 239266 is
239013 (go figure?).  These typically ALL have the brass oiler on them, and
the later brackets on BN2s do not. But this is not a big deal, as I prefer
the ones with the bushing oiler.

[image: Inline image 1]
These typically run $45 to $65 on eBay.  None listed right now but be
patient.

The front bracket is *"Bracket or frame, drive end"* and is Lucas part
no. *239012.
*These are a bit harder to find.

Also, have you tried the good folks at Star Auto Electric in Los Angeles?
They should be able to fix you up.

http://www.starautoelectric.com/


*207 W Foothill Blvd*


*Monrovia, CA 91016(866) 969-7827 <(866)%20969-7827> *
Cheers,

Curt

On Tue, Oct 10, 2017 at 4:35 PM, Curtis Arndt <cnaarndt at gmail.com> wrote:

> These generator end plates are quite common and I've purchased plenty of
> them NOS off of eBay over the years.
>
> You're specifically looking for a *"Bracket or frame, commutator end"* or
> try this in an eBay search "Lucas generator commutator end plate or
> bracket"  NOS good, as I find these for sale quite often.
>
> The Lucas part no. for a 22456A/D or a 22383A/B/D generator is *239266*.
>
> Cheers,
>
> Curt
>
> On Tue, Oct 10, 2017 at 12:27 PM, Tom Felts <tomfelts at windstream.net>
> wrote:
>
>> I had mine welded  back on.
>>
>> ---- Oudesluys <coudesluijs at chello.nl> wrote:
>>
>> =============
>> Fit an alternator!
>> Kees Oudesluijs
>>
>>
>> Op 10-10-2017 om 7:25 schreef Ray Juncal:
>> > I have broken mounting tabs on both front and rear end plates of my
>> > BN-1 generator. I want to send it out for a complete rebuild. What is
>> > the best way to deal with the broken end plates?  Anyone have a burned
>> > up generator they want to sell the end plates off of?, or how about a
>> > complete rebuildable four cylinder generator. What is the wisdom of
>> > the list?
>> > Thanks
>> > Ray Juncal
>> >
>> >
>> >
>> > _______________________________________________
>> > Support Team.Net http://www.team.net/donate.html
>> > Suggested annual donation  $12.75
>> > Archive: http://www.team.net/archive
>> > Forums: http://www.team.net/forums
>> >
>> > Healeys at autox.team.net
>> > http://autox.team.net/mailman/listinfo/healeys
>> >
>> > Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/healeys/coudesluijs at chello.nl
>> >
>>
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/
>> options/healeys/cnaarndt at gmail.com
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20171010/c142b311/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Generator 239266.jpg
Type: image/jpeg
Size: 4781861 bytes
Desc: not available
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20171010/c142b311/attachment-0001.jpg>

<Prev in Thread] Current Thread [Next in Thread>