Need new rear shocks on my '58, but having difficulty removing the old ones.To
remove the old shock I took out the two bolts that are attached it to the
frame. Then removed the nut that holds on the lever, but could not getting the
lever to slide off the bolt. Hit the lever with a hammer and it's still stuck.
Wondered if I need a bigger hammer, can the bolt be backed out, or is there an
easier way to remove the shock? Any advice would be appreciated.
Greg Hill
BN4
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180626/241bd73e/attachment.html>
|