OK----update. This morning pulled wheel/hub/bearings. bearings looked good.
Did find some in/out movement when pulling on the hub. Right or wrong, I add a
.003 spacer and really snugged the hub nut down. put back together and all was
good--no more noise and everything is smooth.tom----- Original Message -----
From: Tom Felts <tomfelts at windstream.net>
To: healeys at autox.team.net
Sent: Sun, 01 Jul 2018 20:45:05 -0400 (EDT)
Subject: [Healeys] snap crackle and pop
body {height: 100%; color:#000000; font-size:12pt; font-family:arial,
helvetica, sans-serif;}When turning hard to the right (slow moving) I get a lot
of these noises at the left front wheel area. Assume it is the tie rod? I
first thought it was a loose spinner but that was not it. Any ideas?tom BJ8
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20180702/7e6352fe/attachment.html>
|