--===============3506379371686910339==
boundary="=_109b8f92-bff8-4b42-9103-71160a052e02"
--=_109b8f92-bff8-4b42-9103-71160a052e02
Content-Transfer-Encoding: 7bit
yes---thank you.tom
----- Original Message -----
From: Bob Spidell <bspidell@comcast.net>
To: healeys@autox.team.net
Sent: Wed, 20 Feb 2019 23:19:47 -0500 (EST)
Subject: Re: [Healeys] Clutch and brake pedal issue
Well, did you get a good pedal?bs
On 2/20/2019 3:09 PM, Tom Felts wrote:
Please disregard this message below--I have figured it out.
I had to bleed the masters first before any fluid would come
into themtom
----- Original Message -----
From: Tom Felts <tomfelts@windstream.net>
To: healeys@autox.team.net
Sent: Wed, 20 Feb 2019 17:45:32 -0500 (EST)
Subject: Clutch and brake pedal issue
OK---so, I have replaced the clutch master and slave with new
units from HS. I have looked at the brake master and it is
clean as a pin. All lines to both systems are tight and there
is new fluid in the cannister.
Pumping the brake and clutch pedals as much as I can i can
build up no pressure at all in either. I had filled the
cannister before starting----and---I see no decrease in fluid
level in it after pumping the pedals.
Is it possible that the cannister is clogged up and won't let
fluid get to the masters? Other that that, I'm stumped as to
why I can build up no resistance in either system.
Any thoughts?
thankstom
--=_109b8f92-bff8-4b42-9103-71160a052e02
Content-Transfer-Encoding: quoted-printable
<html><head><style> body {height: 100%; color:#000000; font-size:12pt; font=
-family:arial, helvetica, sans-serif;}</style></head><body><div>yes---thank=
you.</div><div><br data-mce-bogus=3D"1"></div><div>tom</div><div><br></div=
><div>----- Original Message -----<br>From: Bob Spidell <bspidell@comcas=
t.net><br>To: healeys@autox.team.net<br>Sent: Wed, 20 Feb 2019 23:19:47 =
-0500 (EST)<br>Subject: Re: [Healeys] Clutch and brake pedal issue<br></div=
><div><br></div><p>Well, did you get a good pedal?</p><p>bs<br></p><div cla=
ss=3D"moz-cite-prefix">On 2/20/2019 3:09 PM, Tom Felts wrote:<br></div><blo=
ckquote cite=3D"mid:1544291114.239471300.1550704150257.JavaMail.zimbra@wind=
stream.net"><div>Please disregard this message below--I have figured it out=
. <br> I had to bleed the masters first before any fluid would come<br=
> into them</div><div>tom</div><div><br></div><div>----- Original Message -=
----<br><div><br></div>From: Tom Felts <a class=3D"moz-txt-link-rfc2396E" h=
ref=3D"mailto:tomfelts@windstream.net"; target=3D"_blank" data-mce-href=3D"m=
ailto:tomfelts@windstream.net"><tomfelts@windstream.net></a><br><div>=
<br></div>To: <a class=3D"moz-txt-link-abbreviated" href=3D"mailto:healeys@=
autox.team.net" target=3D"_blank" data-mce-href=3D"mailto:healeys@autox.tea=
m.net">healeys@autox.team.net</a><br><div><br></div>Sent: Wed, 20 Feb 2019 =
17:45:32 -0500 (EST)<br><div><br></div>Subject: Clutch and brake pedal issu=
e<br></div><div><br></div><div>OK---so, I have replaced the clutch master a=
nd slave with new<br> units from HS. I have looked at the brake maste=
r and it is<br> clean as a pin. All lines to both systems are tight a=
nd there<br> is new fluid in the cannister.</div><div><br></div><div>Pumpin=
g the brake and clutch pedals as much as I can i can<br> build up no =
pressure at all in either. I had filled the<br> cannister before star=
ting----and---I see no decrease in fluid<br> level in it after pumping the =
pedals.</div><div><br></div><div>Is it possible that the cannister is clogg=
ed up and won't let<br> fluid get to the masters? Other that that, I'=
m stumped as to<br> why I can build up no resistance in either system.</div=
><div><br></div><div>Any thoughts?</div><div><br></div><div>thanks</div><di=
v>tom</div><br></blockquote><div><br></div><div><br></div></body></html>
--=_109b8f92-bff8-4b42-9103-71160a052e02--
--===============3506379371686910339==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============3506379371686910339==--
|