This is a multi-part message in MIME format.
--===============7215263762232569383==
boundary="----=_NextPart_000_0033_01D53E2C.690BECD0"
Content-Language: en-us
This is a multi-part message in MIME format.
------=_NextPart_000_0033_01D53E2C.690BECD0
charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
I think the idea behind anti-seize on the splines is because some wheels =
don't get removed unless for cause. Cleaning and re-lubricating more =
frequently than whenever also prevents the splines from seizing due to =
rust or anything else.
=20
Steve Byers
HBJ8L/36666
BJ8 Registry
AHCA Delegate at Large
Havelock, NC =20
=20
=20
From: Healeys [mailto:healeys-bounces@autox.team.net] On Behalf Of Bob =
Spidell
Sent: Friday, July 19, 2019 11:08 AM
To: healeys@autox.team.net
Subject: Re: [Healeys] Spline grease
=20
I've used various, including anti-seize, but have used wheel bearing =
grease for the last 20years/80K miles or so with no issues. =20
I'm presuming there is some tiny movement between the splines no matter =
how well fitted; anti-seize is formulated to prevent, well, seizing =
(i.e. parts rusting together). Wheel bearing grease is formulated for =
heat and extreme pressures and to stay where its applied. I've not used =
Cu anti-seize, but have seen the Al and Ni formulations dry out, leaving =
the finely-ground metal so rusting is prevented, but any lubricating =
qualities are largely gone. I use anti-seize on spark plugs, and when =
you pull them out and look at the threads there is no lubricant =
remaining, only the metal.
*Flame suit on*
Bob
ps. Ditto on the clear RTV to keep the hub and spokes clean(er).
=20
On 7/19/2019 7:01 AM, Curtis Arndt wrote:
I agree 100% with Rick. Copper anti-seize is the only way to go.
=20
Curt
=20
On Fri, Jul 19, 2019 at 3:43 AM HealeyRick <healeyrik@gmail.com> wrote:
Hi Ira,=20
=20
I seal the wheel spokes inside the hub with clear silicone to keep =
grease from climbing up the spokes then use copper anti-seize on the =
wheel splines.
=20
Best regards,
Rick
=20
------=_NextPart_000_0033_01D53E2C.690BECD0
charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml"; =
xmlns=3D"http://www.w3.org/TR/REC-html40";><head><meta =
http-equiv=3DContent-Type content=3D"text/html; charset=3Dutf-8"><meta =
name=3DGenerator content=3D"Microsoft Word 12 (filtered =
medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:"Comic Sans MS";
panose-1:3 15 7 2 3 3 2 2 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";
color:black;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";
color:black;}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0in;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";
color:black;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";
color:black;}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:"Consolas","serif";
color:black;}
span.EmailStyle20
{mso-style-type:personal-reply;
font-family:"Comic Sans MS";
color:#002060;
font-weight:normal;
font-style:normal;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";
color:black;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]--></head><body bgcolor=3Dwhite =
lang=3DEN-US link=3Dblue vlink=3Dpurple><div class=3DWordSection1><p =
class=3DMsoNormal><span style=3D'font-size:11.0pt;font-family:"Comic =
Sans MS";color:#002060'>I think the idea behind anti-seize on the =
splines is because some wheels don't get removed unless for cause.=C2=A0 =
Cleaning and re-lubricating more frequently than whenever also prevents =
the splines from seizing due to rust or anything =
else.<o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Comic Sans =
MS";color:#002060'><o:p> </o:p></span></p><div><p =
class=3DMsoNormal><span style=3D'font-size:11.0pt;font-family:"Comic =
Sans MS";color:#002060'>Steve Byers</span><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#00206=
0'><o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Comic Sans =
MS";color:#002060'>HBJ8L/36666</span><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#00206=
0'><o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Comic Sans MS";color:#002060'>BJ8 =
Registry</span><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#00206=
0'><o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Comic Sans =
MS";color:#002060'>AHCA Delegate at Large</span><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#00206=
0'><o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Comic Sans =
MS";color:#002060'>Havelock, NC </span><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#00206=
0'><o:p></o:p></span></p><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Calibri","sans-serif";color:#00206=
0'><o:p> </o:p></span></p></div><p class=3DMsoNormal><span =
style=3D'font-size:11.0pt;font-family:"Comic Sans =
MS";color:#002060'><o:p> </o:p></span></p><div><div =
style=3D'border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in =
0in 0in'><p class=3DMsoNormal><b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'>From:</span></b><span =
style=3D'font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowt=
ext'> Healeys [mailto:healeys-bounces@autox.team.net] <b>On Behalf Of =
</b>Bob Spidell<br><b>Sent:</b> Friday, July 19, 2019 11:08 =
AM<br><b>To:</b> healeys@autox.team.net<br><b>Subject:</b> Re: [Healeys] =
Spline grease<o:p></o:p></span></p></div></div><p =
class=3DMsoNormal><o:p> </o:p></p><p>I've used various, including =
anti-seize, but have used wheel bearing grease for the last 20years/80K =
miles or so with no issues. <o:p></o:p></p><p>I'm presuming there =
is some tiny movement between the splines no matter how well fitted; =
anti-seize is formulated to prevent, well, seizing (i.e. parts rusting =
together). Wheel bearing grease is formulated for heat and extreme =
pressures and to stay where its applied. I've not used Cu =
anti-seize, but have seen the Al and Ni formulations dry out, leaving =
the finely-ground metal so rusting is prevented, but any lubricating =
qualities are largely gone. I use anti-seize on spark plugs, and =
when you pull them out and look at the threads there is no lubricant =
remaining, only the metal.<o:p></o:p></p><p>*Flame suit =
on*<o:p></o:p></p><p>Bob<o:p></o:p></p><p>ps. Ditto on the clear =
RTV to keep the hub and spokes =
clean(er).<o:p></o:p></p><p><o:p> </o:p></p><div><p =
class=3DMsoNormal>On 7/19/2019 7:01 AM, Curtis Arndt =
wrote:<o:p></o:p></p></div><blockquote =
style=3D'margin-top:5.0pt;margin-bottom:5.0pt'><div><div><p =
class=3DMsoNormal>I agree 100% with Rick. Copper anti-seize is the =
only way to go.<o:p></o:p></p></div><div><p =
class=3DMsoNormal><o:p> </o:p></p></div><div><p =
class=3DMsoNormal>Curt<o:p></o:p></p></div><p =
class=3DMsoNormal><o:p> </o:p></p><div><div><p class=3DMsoNormal>On =
Fri, Jul 19, 2019 at 3:43 AM HealeyRick <<a =
href=3D"mailto:healeyrik@gmail.com";>healeyrik@gmail.com</a>> =
wrote:<o:p></o:p></p></div><blockquote =
style=3D'border:none;border-left:solid #CCCCCC 1.0pt;padding:0in 0in 0in =
6.0pt;margin-left:4.8pt;margin-right:0in'><div><p class=3DMsoNormal>Hi =
Ira, <o:p></o:p></p><div><p =
class=3DMsoNormal><o:p> </o:p></p></div><div><p class=3DMsoNormal>I =
seal the wheel spokes inside the hub with clear silicone to keep grease =
from climbing up the spokes then use copper anti-seize on the wheel =
splines.<o:p></o:p></p></div><div><p =
class=3DMsoNormal><o:p> </o:p></p></div><div><p =
class=3DMsoNormal>Best regards,<o:p></o:p></p></div><div><p =
class=3DMsoNormal>Rick<o:p></o:p></p></div></div></blockquote></div></div=
><p =
class=3DMsoNormal><br><br><o:p></o:p></p><pre><o:p> </o:p></pre></bl=
ockquote></div></body></html>
------=_NextPart_000_0033_01D53E2C.690BECD0--
--===============7215263762232569383==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============7215263762232569383==--
|