mg-t
[Top] [All Lists]

Torque specifications:

To: mgs <mgs@autox.team.net>, DOHC <mgatwincam@egroups.com>,
Subject: Torque specifications:
From: Bullwinkle <yd3@nvc.net>
Date: Sun, 02 Feb 2003 15:01:50 -0600
While recently checking torque specs in a Sturtevant torque wrench book I
came across the following listings.  Part of the information doesn't make
sense. It appears as though some of the data is in the wrong column or the
wrong make.  ut it may contain some new information for others.  Perhaps
someone can make some sense of this. AFAIK there are no typos.
I tripple checked.

Torque is in foot pounds

          CYLINDER    BEARINGS   SPARK  FLYWHEEL MANIFOLDS  VALVE SPRINGS
MAKE      HEAD        ROD MAIN   PLUG   to crank           compress  Lbs. to
                                                           length   Compress

Metroplitan

57-61       40        33  70
A&B         40        33  70     30     35        15
1500        40        33  77-80  30     35        15

M.G.

 TD-TF      42        27  63     30
 MGA 1500,
 1600,
twin cam    70        35  70     30
 MGB        40        35  70     30     40       15 intake
                                                 15 exhaust
 Midget     40        35  60     30     40
 Magnette   40-45     35  70     30     35

Morris
 M.G.A.               35  70     30              1.08 inner
                                                 1.205 outer
 ISIS       35 studs  50  75     30
            75 nuts
 Oxford II  40-45     35  70     30     35                    1-17/32 77.5
 Oxford V   40        35  70     30     35
 Minor      40        33  65     30     110
 MM-11-100  40        33  65     30     50


Wolseley
 6/90       75        50  75                                  1.531    62.5
 15/60      40-45     35  70

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>
  • Torque specifications:, Bullwinkle <=