Scott
I would first try to make something up from available stock. I don't think
that the pin needs to be too hard and I have had great success with using an
old nail of the correct diameter and cutting it to length. You could make up
a couple of them and carry them along in your spares so that you can fix it
on the road should the need arise.
Brian
1950 MGTD
1954 MGTF
1959 MGA Coupe
1974 MGB GT
----- Original Message -----
From: "S. Allen" <sallen3663@gmail.com>
To: "MG T Digest" <mg-t@autox.team.net>
Sent: Tuesday, May 03, 2005 12:30 PM
Subject: Dizzy Part Needed
> Hi,
>
> While putting the dizzy back on my '52 the clip that holds the cap to
> the body came off and the pin that hold the clip to the body is now
> missing.
>
> The Moss and Abingdon Spares catalogs don't list the part.
>
> Anyone on the list have one laying about that they can sell me?
>
> Any help appreciated,
>
> Scott Allen
> 52 TD
> 74 1/2 BGT
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|