Re: TD/TF Steering wheel nut

[TATERRY@aol.com]

Folks, thanks to all that replied...it turns out to be 3/4" x 16tpi.....weird 
when nearly all other bolts on the TF are BSF.

Also, I spent two hours upside down under the dash trying to start a 1/4" 
bolt into the center bracket of the dash.....It is 2BA as I discovered!!  the 
side brackets take 1/4" BSF.

Cheers, 
Terry

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t