Dan,
Many years ago I purchased a Buick 3.5 liter to rebuild and as I dismantled it
I weighed parts. As I recall the total including flywheel, starter, water
pump, exhaust manifolds, intake manifold, and 2-barrel carb was 320 or 330
pounds. It's been a while so my memory is a bit foggy, but I lifted it out of
my (TR6) trunk complete and put it on the bench by myself and I'm sure not a
big guy. (Yeah, I'm sure I got lots of attention on the highway with a V8
stuffed in my trunk.) Anyway, for what it's worth.
Gordon Buck
Sultan, Washington
71 TR6 CC62806
67 MGB GT
-----Original Message-----
From: DANMAS@aol.com [SMTP:DANMAS@aol.com]
Sent: Friday, November 20, 1998 4:05 PM
To: Paul.Kile@Aerojet.com; mgb-v8@Autox.Team.Net;
DAN_GRAVES@hp-roseville-om3.om.hp.com
Subject: Re: Rover/Buick/Olds conversions...
In a message dated 98-11-20 17:22:24 EST, Paul.Kile@Aerojet.com writes:
> If you check out the "engine
> weights" page on the Scions of Lucas web page, you will find the 215/3500cc
> aluminum V-8 weighs 318 pounds, vs 460 pounds for the Ford 289.
Paul,
We need to be real careful when talking about engine weights, especially if we
are using the data from the Scions of Lucas site, to be sure we are not
comparing apples to doughnuts. We must make sure we are comparing engines in
identical dress. If we include the starter in one, but not in the other, that
can account for 15 - 20 pounds alone. Like wise, an aluminum intake may weigh
16 pounds, whereas the factory iron manifold for the same engine may weigh as
much as 39 pounds. A liitle bit of this can lead to a LARGE descrepancy when
making comparisons.
Also, The data in that chart is compiled from a variety of sources, some of
which I KNOW to have errors in their dimensional data. If there are errors in
the dimensions, it's not unreasonable to asume there are errors in the weight
data as well.
Now, having said all this, I'll make a trade - if anyone out there can tell me
EXACTLY how much a BOP/Rover engine weighs, and EXACTLY what components are
included/excluded in that weight, I'll do the same for the Ford 302 engine.
A stock Ford 302, with iron heads, iron intake, Carburetor, valve covers,
flywheel, clutch, headers, starter, alternator, distributor, fan, water pump,
pulleys - everything needed to run except oil and water - weighs 519 pounds.
This weight was determined by disassembling one and weighing it piece by piece
on a bathroom scale.
That same engine, with aluminum water pump, heads, and intake manifold,
lightweight flywheel, light weight starter - everthing needed to run except
oil and water - weighs only 424 pounds.
How accurate are these numbers? When I recieved my Crate engine, I weighed
all the packing material and subtracted that from the shipping weight. When I
compared that value to my to my figures based on the stock engine in
equivalent condition, the weights agreed TO THE POUND! Based on that, I would
estimate an error of +- 5 pounds.
424 pounds is still a lot more than 318, but what does a fully dressed, ready
to run, BOP/Rover engine actually weigh? I would guess there is not that much
difference.
Another somewhat surprising fact - The Ford 302 is SMALLER than the BOP/Rover
engine. That statement is based on actual measurements.
In a message dated 98-11-20 16:58:41 EST, DAN_GRAVES@hp-roseville-
om3.om.hp.com writes:
> Just curious. For those of you building MG's with R/B/O V8's, why
> that particular engine?
Dan,
As far as I can imagine, there are about 8 reasons for a given engine choice:
1) The "gee Whiz" factor
2) Availability of the base engine
3) Availability of "go fast" goodies for the engine
4) Money available to spend
5) Fabrication skills of the owner
6) Performance potential
7) Engine Weight
8) Engine size
If either item 4 or item 5 are available in abundance, then the only other
factor that really counts is item 1. For myself, nothing else says "Gee Whiz"
quite like a V8. Others may have different ideas, but for me, it has to be a
V8. Given enough of items 4 or 5, you can stick anything in there you want, up
to and including a V12.
Items 4 and 5 are rarely in abundance, so they play a major role in the engine
choice. Having a lot of one, but little of the other will have little impact
on your choice, but if you are like most of us, not having much of either,
your choices are limited. You won't be able to stray to far from the well
beaten path, using an engine choice for which there is not a lot of
information available. From that standpoint, the BOP/Rover wins hands down.
There is probably no question you can ask about this choice that can't be
readily answered by someone who has been there. It will cost you a whole lot
less to get a professional, someone like Glenn Towery, for example, with lots
of experience, to install the BOP/Rover than to get the same expert to install
something else. You will have to pay for his learning curve. Likewise, if you
run into a problem installing another engine, you are going to pretty much
have to solve it yourself. How much of item 5 do you have? (since you have a
Ford in your MG, my guess is quite a lot!)
Item 2, availability of the base engine, doesn't restrict your choices very
much, as there are plenty of BOP/Rover engines available, as well as a large
selection of other V8s and 4 or 6 cylinder engines. There are even some well
suited rotary engines available.
Item 3 will restrict you somewhat, as there are a limited number of engines
for which there is a large election of after market goodies available. The
Ford will definately win out over the BOP/Rover in this aspect.
Item 6 is only a factor as far as it relates to item 1, the Gee Whiz factor.
The performance of even the stock engine is enough for a lot of pleasure. If
you go too far beyond the limits of the BOP/Rover, you probably will have more
power than you can really use anyway. Never-the-less, the performance
potential for the Ford is quite a bit higher than for the BOP/Rover. 500
streetable HP is not out of the question for the 302. 1000 HP is available if
you don't ever have to idle. I don't know of any 4 or 6 cylinder that can come
close.
Item 7 goes to the BOP/Rover - it's even lighter than the stock 4 cylinder.
How it compares to a rotary, I don't know.
Item 8 goes to the original engine, or another 4 cylinder, or perhaps a
rotary. Between the Ford and the BOP/Rover, the Ford wins. You can use a
Chevy, and I have seen some very fine examples of this, but they are much
heavier, and even larger than the BOP/Rover. But, if you like a Chevy, refer
to item 1!
Enough is enough, so I'll shut up now (my sig line will tell you my choice!).
Dan Masters,
Alcoa, TN
'71 TR6---------3000mile/year driver, fully restored
'71 TR6---------undergoing full restoration and Ford 5.0 V8 insertion - see:
http://www.sky.net/~boballen/mg/Masters/index.html
'74 MGBGT---3000mile/year driver, original condition - slated for a Ford 5.0
soon
'68 MGBGT---organ donor for the '74
|