[Top] [All Lists]

Re: Spridget panel behind seats

Subject: Re: Spridget panel behind seats
From: Matt Liggett <>
Date: Wed, 06 Dec 1995 12:13:30 -0500
At Tue, 5 Dec 1995 09:40:22 -0800, Stan Fickes writes:
> The DPO of my Sprite had cut large round holes for what was once a pair of
> speakers in mine.  I bought some thin plywood, a piece of black vinyl and
> some 1/2" foam rubber.  I cut the wood to shape, covered it with the foam
> and vinyl (staple the vinyl in place) then blind riveted it into place from
> the inside of the boot.  It looks perfect and no screws intrude into the
> passenger side.  It was cheap too!

That sounds pretty decent.  My [admittedly more expensive] idea was to use a 
nice thin piece of stained hardwood cut to fit and then mounted with 
shined/buffed stainless steel hardware.  I think of it as a chance to practice 
for the dash.

|                Matt Liggett <>                 |
|                   |
|-------------------> Bloomington, Indiana, USA <--------------------|
|  1974 Ford Bronco Ranger   1970 MG Midget   1978 Honda Civic 1200  |

<Prev in Thread] Current Thread [Next in Thread>
  • Re: Spridget panel behind seats, Matt Liggett <=