[Top] [All Lists]

Re: Clutch thowout bearings...

To: "Palmer, Lew (UCI)" <>
Subject: Re: Clutch thowout bearings...
From: Glenn Stauffer <>
Date: Thu, 11 Jan 1996 16:12:16 -0400
Palmer, Lew (UCI) wrote:
> If you are wearing these out at that rate, then your clutch bearing is out
> of alignment (hits on one side first - not squarely). Also, make sure you
> have reinstalled the spring clips the right way around. If these aren't
> right, the bearing will never seat correctly.
> Regards,
> Lew Palmer
>  ----------

Thanks for the tip.  What is the normal rate of wear for the graphite ring 
release bearings.  I was told 25,000 miles by a mechanic who replaced one 
for me one time.

Glenn Stauffer

<Prev in Thread] Current Thread [Next in Thread>