[Top] [All Lists]

Re: Trans on a 77 MGB

Subject: Re: Trans on a 77 MGB
Date: Sat, 27 Jan 1996 09:22:04 -0500
I have a 4 speed trans from a 72 B which I know is good since I was driving
the car before I pulled it out.

Regarding the U-joint bolts.  I beleive the shank on the bolts is larger than
a normal bolt so it fits tightly into the hole on the driveshaft flange.  A
normal hardware store bolt is smaller and may work itself lose.  (I had this
problem on my car).  The Roadster Factory and Moss Motors both can supply the
proper sized bolts.

<Prev in Thread] Current Thread [Next in Thread>