[Top] [All Lists]

RE: Front Wheel Bearings Assembly

Subject: RE: Front Wheel Bearings Assembly
From: "Christopher G. Moog" <>
Date: Tue, 03 Dec 1996 18:57:29 -0500
1. Clean all the grease off the parts.
2. Sort all shims from thickest to thinest.
3. Assembly with no shims.
4. While tightening nut spin the hub if it binds you need to add a shim.
5. Repeat until adding the thinest shim and tightening to specified 
torque allows the hub to spin, while removing the thinest available shim 
causes binding.
6. Grease bearing and reassembly.

<Prev in Thread] Current Thread [Next in Thread>