> If you have it that far apart, then look for a number on the ring
> gear i.e., xx/xx. Divide the larger number by the smaller
> number and you will come up w/ 3.90 or 4.10 or 4.22 or whatever
> the ratio is. The number is there to keep you from having to
> count the teeth.
On the 'banjo' rear ... the number of teeth are stamped on top of
the diff ... IOW, for the stock 'B' ratio you will find 41/13
stamped on the top of the carrier ... so, you don't have to remove
the diff to determine the ratio.
Safety Fast! ... firstname.lastname@example.org
'61 MGA 1600 MkII